But while a mesh seems to work very well for most users, in principle I don't like the idea of extending the network wirelessly when I have the technical option to setup a wired connection to another base station. Would that setup work as a roaming network or would I have problems with DHCP or something like that? Another option I have been considering is replacing the current setup with a mesh network. I wouldn't want to do it in the AirPort extend way (connecting another AirPort wirelessly to the first AE), but rather have another AirPort in another room connected to the same Ethernet switch as the first AE, with the same SSID and password. However, the wifi connection on the balcony at the other end of the apartment is lacking and therefore I'm considering options to improve the coverage. Currently I have an AirPort Extreme A1521 in one room with some gear connected to it wired, other gear in the apartment wirelessly. There I have an Ethernet switch which is connected to Ethernet outlets in four separate rooms. My apartment has a wired 100 Mbps internet connection coming to an Ethernet connector in the fusebox cabinet. My question is whether the simpler system suggested by the cabler (with separate ethernet connections direct to the 3 Airports) will enable (a) single internet network (b) a roaming wireless network and (c) a network that I can monitor // edit through Airport Utility.Ī roaming network with two AirPort Extremes connected to a switch? Hi. I am having cabling work done in my home to correct a cable outlet issue and the cabler has suggested that, in relocating the modem router next to the patch panel, I simplify the ethernet network by having ethernet running directly from 3 ethernet ports to the 3 different Airports (in rooms 1-3). However the network system works well and enables a roaming wireless network for portable devices as I move from room to room. The Ethernet connections are implemented through a patch panel system and to “daisy chain” the Airport routers on two levels of a large house requires a complex system of Ethernet running up and down to the patch panel (and back again). (The Modem Router cannot be set to bridge mode.). Of course, more ports on tap are available simply by connecting a hub. The AirPort Extreme only has three Gigabit Ethernet LAN ports in a competitive field where four ports are standard. It has a theoretical throughput of 450 Mbps on the 2.4GHz band and 1300 Mbps on the 5GHz band. AE1, AE2 and Express are all in bridge mode and set to create a wireless network. The AirPort Extreme supports simultaneous dual-band broadcasting. AE1 is in turn connected by Ethernet to AE2 in Room 2 and AE2 is connected by Ethernet to Airport Express in Room 3. My question is, if I turn off the radios on the upstairs AE, will that mess up the roaming network over Ethernet I have already setup with the two downstairs AE? I would essentially be swapping out the old modem/router for the new modem/router, but using the radios on the modem/router for the WiFI 6 standard.ĭoes that make sense? I've attached an illustration to help out.ĪirPort Extremes Connected by Ethernet - Roaming Network I have an AirPort Extreme (AE1) connected to a Modem Router in Room 1. I have ethernet running everywhere through out my home. The AirPort Express is 3.85-inches wide, by 3.85 inches deep and about 1-inch high. Ethernet cables leave switch to go to all parts of the house (pre-wired). Plug ethernet cables from my two NAS and one 8 port switch into the TimeCapsule. Plug into cable modem in basement (Xfinity wifi off). And I want to keep the upstairs AirPort Extreme (AE) next to the new Wifi 6 router, but ONLY to use the AE for the 3 ethernet ports on the back (essentially turning off the radios on the AE so they don't interfere with the new modem/router). The AirPort Express can access music or audio streamed from an iPhone, iPad, iPod or iTunes via your computer, and using AirPlay, play it on a connected powered speaker, stereo, or home theater system. Set up 3 GB TimeCapsule Airport Extreme in basement, dual band 2.4/5 Ghz for compatibility + guest access. I'd like to keep the roaming network turned on for the 2 downstairs AirPort Extremes since I'm not upgrading those yet. We just got a new Wifi 6 modem/router from our fiber provider and I'd like to use this newer standard upstairs, since AirPort Extreme only supports 802.11ac. I have 3 AirPort Extreme routers (6th Gen), 1 upstairs and 2 downstairs. The following instructions provides the basics for setting up the 802.11n or 802.11ac AirPort base stations for port mapping/forwarding using AirPort Utility v6.x.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |